SINGAPORE

GRGCASH and SMARTCOIN Integrations

This page helps to set up on GRGCASH and SMARTCOIN Integrations

STEP 1: INSTALLING THE DRIVERS

The Drivers should be installed at the Machine where the GRGCASH Machines are installed. For SMARTCOIN, the Driver is not necessary. The Driver can be downloaded from the DinePlan Drive (DINEPLAN\Softwares\GrgCashCoin)

Once it is installed, We will get the PORT NAME of GRGCASH and SMARTCOIN

SMART.jpg

STEP 2: CONFIGURE GRGCASH SETTINGS 

GRGCASH has come in two types (USB or COM PORT). Knowing type is mandatory to do the settings at the relevant files. 

There is a file in the DinePlan Installation Folder called "GRGDTATM_CommCfg.ini"

Open the File in Editor and Change the Content based on USB or COM PORT as below

3 - USB, 1 - COM

STEP 3: CONFIGURATION IN DINEPLAN - DEVICE

Here are configuration has to be done at the DinePlan as below

1. Go to BACKOFFICE --> LOCAL SETTINGS --> DEVICE TAB

2. Click Add for Device and Choose SmartCashCoin

3. Click Settings to choose the Setting for the Device as below:

Allowed Denominations Denominations which the Cash Machine accepts
Port Port of the COIN Machine

 

STEP 4: CONFIGURATION IN DINEPLAN - PAYMENT

1. Go to Back Office --> Tickets --> Payment Types

2. Open the Cash  and go to Payment Processor Tab

3. Click Add and Choose the CashCoinProessor